50 TOOTH COMBINATION SAW BLADE
Product Identification #737316173
10″ x .125″ x 5/8″
Z = 50 ATB/R pos. 15°
Applications: Cross Cutting, Hardwoods, Softwoods, Composites
Description: Combination Rip and Cross Cutting
Here’s a 5 minute video that Leitz Tooling produced explaining their process. They make industrial blades for many other brands on the market.
Affordable Sharpening: There are several Leitz service center locations in the United States that offer professional sharpening services at a reasonable price. The cost to sharpen this 50T blade is $14.25 plus shipping.
Industrial Quality: Leitz Pro Series saw blades are identical in design and quality to our larger Industrial Series options.
FYI: Leiz makes the blades for Festool. The quality is off the charts!
Aaron jensen (verified owner) –
These blades are awesome!!! I have a Ridgid R4512, which is an “underpowered saw” for the most part, and while back I purchased a high-end thin-kerf blade thinking that this would help make my saw more useful, I was wrong. I finally decided to purchase the combo set and couldn’t wait to try the dedicated rip blade and was very impressed, the blade actually cut so well that small shavings came off the blade and not dust. I was able to rip 2″ maple without any strain on the saw, it was unbelievable. I guess this is what happens when you buy good blades. I have also used the rip blade to re-saw 3″ and 4″ stock with no problems and it left the surface that only required minimal sanding. I have not used the combo blade as much as the rip, but am still very impressed with it. I would highly recommend these blades to others, as the quality of the blades are top notch and so is their cut quality. Also, the blades arrived at my door in an extremely timely fashion. Thanks VerySuperCoolTools, you have a very satisfied customer!!
Upvote if this was helpful (1) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Greg Medis (verified owner) –
I found this to be an excellent blade that performs close to a Woodworker II. I have make several end grain cutting boards as demonstrated by Marc Spagnuolo and this blade produced cuts ready to join. At first I was concerned about the lack of anti vibration slots, but this blade spins with essentially no vibration.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Scott Miner (verified owner) –
This blade is incredible. While I haven’t made too many cuts with it, already it’s head and shoulders above anything I’ve ever used. I will definitely be getting the other two Leitz blades here soon. Thanks!
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal
Lane (verified owner) –
I have a 1.75hp table saw and it always bogged down or stopped when rip cutting 5 or 6/4,or above stock. I was using a woodworkerII combination blade. I would have to slow the cut down so much that it would burn or stop. I put this new Levitz combination blade in and cut through 8/4 oak and 6/4 cherry with no problem. I am surprised and happy.
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal