IMPORTANT! This product ONLY works with a VerySuperCool Tools T-Square with an aluminum extrusion fence.
We’ve customized the JessEm Clear-Cut TS Stock Guides to work EXCLUSIVELY with the VerySuperCool Tools table saw fence system.
WHAT’S INCLUDED:
VSC Tools Clear-Cut TS Stock Guide consists of 8 items.
2 – stock guides
2 – steel 7″ t-nuts (Chamfered to work with t-channeled aluminum extrusions)
4 – knurled track knobs (1 inch long threads are customized to fit the VerySuperCool Tools fence system)
SUPERIOR STOCK CONTROL & SAFETY:
Experience the precision of holding your stock securely and safely, thus greatly reducing the chance of kickbacks.
NO TOOLS REQUIRED: If you own the VerySuperCool Tools t-square with aluminum extrusion fence, you’ll find these tablesaw stock guides work effortlessly with our machined, t-channeled extrusion fences.
tony (verified owner) –
I love these things!
I have the VerySuperCool Tools Standard T-square for my router table and the Euro-style on my Grizzly G0623X Slider and I use the JessEm Clear-cut TS Sock Guides with both. I especially like using them with my Euro-t-square and sliding table because now I don’t have to stand in such an awkward position. It’s much, much safer.
And I can stand up straight because I can just use my push sticks and I’m good to go.
I really like that I can use the same pair of stock guides for both for my router table fence and my table saw fence. It takes me 30 seconds to pop it off and run it over and attach to my other extrusion. Plus the adjustments are easy and fast too.
And compared to feather boards? There is absolutely no comparison.
For me it’s a big advantage because when you have a long full 8 foot and you know how it usually wiggles, that’s not a problem any more.
The machining is perfect. It’s not sloppy at all. You can tell it’s very high quality. Thanks VSC Tools for turning me on to these!
(0) (0) Watch Unwatch
tony (verified owner) –
I love these things!
I have the VerySuperCool Tools Standard T-square for my router table and the Euro-style on my Grizzly G0623X Slider and I use the JessEm Clear-cut TS Sock Guides with both. I especially like using them with my Euro-t-square and sliding table because now I don’t have to stand in such an awkward position. It’s much, much safer.
And I can stand up straight because I can just use my push sticks and I’m good to go.
I really like that I can use the same pair of stock guides for both for my router table fence and my table saw fence. It takes me 30 seconds to pop it off and run it over and attach to my other extrusion. Plus the adjustments are easy and fast too.
And compared to feather boards? There is absolutely no comparison.
For me it’s a big advantage because when you have a long full 8 foot and you know how it usually wiggles, that’s not a problem any more.
The machining is perfect. It’s not sloppy at all. You can tell it’s very high quality. Thanks VSC Tools for turning me on to these!
(0) (0) Watch Unwatch
Jeff (verified owner) –
Terrific JessEm Clear-Cut TS stock guides
Love ’em too!
I own a high-end kitchen company and I discovered the Very Super Cool Tools website while searching for an upgrade for our damaged Biesemeyer tablesaw fence. Allen was extremely helpful in determining what we would need to complement our Delta X5 setup.
The JessEm stock guides were a fantastic suggestion to add to the VSC T-square and extrusion because they are designed for the extrusion and are quick to install, setup, and adjust. The guides hold the material down to the table and into the fence which increases accuracy and safety. Ripping 8 foot long sheet goods used to be a combination of death grip and hope in order to avoid ‘the wobble’. Building cabinets in the shop today, we used the new set up for the first time while ripping 2′ x 8′ x 3/4″ birch plywood. It was was a breeze using the JessEm guides. Easy, accurate, and safer…what more could you want?
If you are thinking about the Very Super Cool Tools T-square, get the extrusion and the JessEm stock guides too. It’s a great system.
(0) (0) Watch Unwatch
Jeff (verified owner) –
Terrific JessEm Clear-Cut TS stock guides
Love ’em too!
I own a high-end kitchen company and I discovered the Very Super Cool Tools website while searching for an upgrade for our damaged Biesemeyer tablesaw fence. Allen was extremely helpful in determining what we would need to complement our Delta X5 setup.
The JessEm stock guides were a fantastic suggestion to add to the VSC T-square and extrusion because they are designed for the extrusion and are quick to install, setup, and adjust. The guides hold the material down to the table and into the fence which increases accuracy and safety. Ripping 8 foot long sheet goods used to be a combination of death grip and hope in order to avoid ‘the wobble’. Building cabinets in the shop today, we used the new set up for the first time while ripping 2′ x 8′ x 3/4″ birch plywood. It was was a breeze using the JessEm guides. Easy, accurate, and safer…what more could you want?
If you are thinking about the Very Super Cool Tools T-square, get the extrusion and the JessEm stock guides too. It’s a great system.
(0) (0) Watch Unwatch
Bones (verified owner) –
I spoke to Allan about how I never really felt comfortable with the GRR-RIPPER although it felt safer than most options out there. But once I saw how these JessEm’s worked I knew I had to get them. I installed them on my INCA table saw and all I can say is WOW! I used them on a butcher block project taking an old fir beam and converting it into strips to glue together and it came out splendidly. I highly recommend this product especially to newer woodworkers like me where safety is paramount.
(0) (0) Watch Unwatch